The high pressure solenoid valve is a two-way typewith one inlet and one outlet. It is a packless, internal pilot operated valve,suitable for use in releasing water pressure from the priming chamber of VikingModel E and F Series Deluge Valves and Viking Model H and J Series Flow ControlValves. The solenoid valve has floating diaphragm construction, which requiresa minimum pressure drop across the valve to operate properly. The valves areavailable with a voltage rating of 24V DC in a normally closed or normally openconfi guration. These solenoid valves are for use with system control unitsthat are listed and/or approved for releasing service for water based fi reprotection systems.
+ Normally Closed or Normally Open
+ 24 VDC
+ Easy to clean.
+ Body Style: Straight through
+ NEMA 1 through 9.
+ Required Accessories: A 50 mesh strainer must beinstalled on the inlet side of the valve at the priming line connection. This straineris included as part of the Model E or F Deluge Valve Trim and Model H or J FlowControl Valve Trim.
Body: Brass with ½” (15 mm) NPT connections
Coil: Class H, Continuous Duty
Maximum Operating Pressure: 250 psi (17.2 bar)
Minimum Operating Pressure: 5 psi (.35 bar)
Seals and Discs: Buna N
Core Tube: 305 Stainless Steel
Core and Plugnut: 430F Stainless Steel
Springs: 302 Stainless Steel