Trang chủ Hệ thống dò gas Toxic and combustible Gas Detector

Toxic and combustible Gas Detector

Mã sản phẩm:

Hãng sản xuất: Honeywell

Bảo hành: 1 Năm

Giá bán: Vui lòng liên hệ

Giá khuyến mại: Vui lòng liên hệ

E3Point isa toxic/combustible gas monitor that makes a commercial operation run more intelligently to protect people, property and the bottom line.  It goes beyond protection to increase energy management, efficiency and economical value.

E3Pointis capable of detecting the widest range of toxic and combustible gases foundin commercial building spaces and outbuildings, including CO, NO2, O2, H2, H2S,CH4 and C3H8. It can be used as a standalone unit with single or dual-gasdetection (i.e. using a remote sensor) or deployed as a networkable device(interoperable with BACnet, Modbus or other Building Automation System); E3Pointalso functions with existing controller-based gas monitoring systemsand wired-wireless gas monitoring system components.  

E3Pointuses Demand Control Ventilation—through relays, Building Automation System(BAS) or controller—to increase energy savings, extend fan life and align withgreen building best practices. In its network configuration, E3Pointalso optimizes HVAC, fire/smoke, surveillance and other building systemsperformance.

Intelligent product design reduces the unit’s cost of ownership while increasing flexibility of application. Smart sensors are pre-calibrated, auto-configure upon set-up and operate continuously on patented Reflex© technology which continuously monitors sensor cell condition and alerts user to fault status. The plug-n-play sensor cartridge, user-friendly menu and wiring options simplify installation and maintenance, and reduce the cost of gas monitoring over the life of the unit.

Flexible Operation

  • Comes in standalone, standalone with remote (dual gas mode) ornetwork versions
  • Connects to analog or digital systems
  • Works with virtually any BAS including BACnet and Modbus
  • Connects to wired or wireless system (via 301CW wirelesscontroller)
  • Wall or duct mount
  • Factory-calibrated cartridges

Cost Effective

  • Saves energy through Demand Control Ventilation (DCV)
  • Simplifies installation/maintenance through plug-n-play sensor
  • Remote sensor option provides dual gas monitoring (standaloneversion only)
  • Optimizes BAS, fire, ventilation and other security systems

Versatile Communications

  • Works through BAS to improve fault diagnostics and collectdata on gas concentration levels, sensor condition, etc.
  • Couple with 301C to log data and daisy-chain up to 96 E3Pointunits

Advanced Sensing Technology

  • Detects CO, NO2, O2, H2, H2S,CH4, C3H8
  • Advanced electrochemical (for toxic gases)and catalytic bead(for combustible gases)  sensor performance
  • Uses patented Reflex®and smart cartridgetechnologies

Electrical Certifications

* US (ANSI/UL61010-1)

* Canada (CSA C22.2 No. 61010-1)

Để đặt mua sản phẩm: Toxic and combustible Gas Detector

Quý khách hàng vui lòng điền đầy đủ thông tin theo mẫu bên dưới, chúng tôi sẽ liên hệ lại với quý khách trong vòng 24h.

+ Factory-calibrated replacement cartridges

+ Power transformer

+ Steel-wire detector guards

+ Tamper-proofscrews (main unit only)

Chưa có bình luận về Toxic and combustible Gas Detector

Bản quyền © 2016 thuộc Công ty Cổ phần Công nghệ An toàn Việt Nam | VIETSAFE., JSC
Thiết kế bởi Pridio
hotline