[System Sensor - CÁC THIẾT BỊ CẢNH BÁO] SYS Series - Selectable Output Horns, Strobes, and Horn Strobes
System Sensor selectable output horns, strobes,and horn strobes are rich with features guaranteed to reduce installation timesand maximize profits.
The System Sensor line of notification devices offersthe most flexibile and easy-to-use line of horns, strobes, and horn strobes in theindustry. With red housing, universal fire symbol and a ceiling mount accessoryavailable these devices can meet virtually any application. They also mount toa wide variety of back box sizes to offer the most flexibility in installation.
This line of devices features a wide variety offeatures that
simplifies installations. The mounting plateallows the devices to be compatible with a wide range of back box sizes.Settings for the strobe and horn are done using easy to set rotary switches onthe back of the device. Synchronization is achieved without the use of additionalmodules; when powered with a filtered DC source, the strobe portion is capableof self synchronization for 30 minutes per NFPA 72.
Devices work on 24 volts DC or full wave rectifiedpower. Three candela options are available for the strobe. On the horn strobe model,high and low volume are options for the horn as well as a continuous tone ortemporal 3 output. The mini horn model has a continuous tone output and onevolume setting.
Available accessories include a round trim ring toadapt the wall device for ceiling mount applications. Simply install the roundring over the square device for a perfect fit on the ceiling. An adapter plateis also available for the mini horn. It fits to a wider range of back boxes andfits with the family look of the horn strobe and strobe devices.
• Mounting plate includedfor compatibility with a wide range of back box sizes
• Three field selectablecandela settings: 15, 75, and 115
• Easy to use rotary dialsfor selection of candela and horn settings
• Built in synchronizationfeature keeps strobes in sync for up to 30 minutes
• Strobes Listed to UL1638; Horns Listed to UL 464
• Horn settings on the hornstrobe model include high and low volume, continuous or temporal 3 tone
• Round trim ring availablefor ceiling mount applications
• Universal Fire symbol islanguage independent
Standard Operating Temperature
32°F to 120°F (0°C to 49°C)
10 to 93% non-condensing
Strobe Flash Rate
1 flash per second
Regulated or regulated 24 DC/FWR1
Operating Voltage Range2
16 to 33 V (24 V nominal)
Input Terminal Wire Gauge
14 to 18 AWG*
Strobe and horn strobes dimensions(including lens)
5.15" L x 5.0" W x 1.5" D (131 mm x 127mm x 38mm)
Ceiling trim ring dimensions (sold as a pack of 5)
6.8 " dia / 1.5" depth (173 mm dia / 1.5" depth)
Mini Horn Dimensions
4.6"L x 2.9" W x 1.44" D (117 mm x 74 mm x 37mm)
Mini horn trim plate (sold as a pack of 5)
5.1" L × 5.0" W × 1.73" D (151 mm L × 129 mm W × 43 mm D)
Full Wave Rectified (FWR) voltage is a non-regulated,time-varying power source that is used on some power supply and panel outputs.
* Mini horn is rated for 12 to 18 AWG
Model DescriptionModel Description
Wall Horn Strobes
SYS-HS Horn Strobe
SYS-HSR Horn Strobe, Red Lens
SYS-STR Strobe, Red Lens with Chinese Lettering
SYS-CTP Round Trim Ring for Ceiling Installation
SYS-CTPR Round Trim Ring for Ceiling Installationsfor Use with Red Lens Strobes and Horn Strobes
MHR1 Mini-Horn, Red
SYS-MHTP Trim Ring for use with the Mini Horn