Two versions of the intelligent addressable loop powered reflective beam detectors are available in this range, the (MAB50R) with a range of up to 50 metres and the (MAB100R) with a range of 50 to 100 meters.
Both the (MAB50R) and the (MAB100R) are compatible with the Cooper range of intelligent addressable fire systems.
These intelligent addressable loop powered reflective beam detectors are extremely simple to install, they require no separate power supply, operate on a reflective principle and have a simple set up mode to enable easy and quick alignment during installation.
These units are designed to replace individual point detectors in large open areas such as warehouses.
Fire and fault conditions are signalled to the control panel using standard loop wiring so no additional interconnection required.
Features
- Loop connected
- Soft addressed
- Integral short circuit isolator
- Single address
- Reflective beam detection
- Two ranges available
- - up to 50m
- - 50m to 100m
Benefits
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
Code
MAB50R/MAB100R
Description
Reflective Beam Detector
Standards
EN54 Pt12 & Pt17 2002
Specification
Operating Voltage
18V dc to 30V dc
Quiescent Current
<5mA (no LED’s illuminated)
Alarm Current
<9mA
Alignment Current
<18mA
Power up Time
10 seconds (approx.)
Operating Range
5 to 50 meters (MAB50R) 5 to 100meters (MAB100R)
Tolerance to Beam Alignment at 35%
Detector + 0.8O, Prism +5.0O
Fire Alarm Thresholds
2.50dB (25%) 3.74dB (35%) 6.02dB (50%)
Optical Wavelength
880nm
Environmental
Operating Temperature
-10OC - +55OC
Humidity (Non Condensing)
0 to 93% RH
Physical
Construction
PC/ABS
Color
White
Dimensions (HxWxD)
210mm x 130mm x 120mm
Weight
0.8kg
Ingress Protection
IP40
Compatibility
Suitable for use with
Cooper Intelligence Addressable Fire Systems
Dịch
